General purpose silicone sealant
KALI 3000 / Kastar730 is an acid-curing, one-component silicone sealant for a range of general sealing and glazing applications. It's suitable for uses on common non-porous building materials.
Properties
Stays permenantly elastic after curing
Acetoxy curing system
Very good adhesion on common building materials and non-porous surfaces
Resistance to aging, cracking and discoloring
Resistant to many chemicals, cleaning agents and detergents
Can be applied in any season
Typical acetic smell during curing
sample
exhibition
Applications
General sealing and glazing applications
Sealing around windows and doors
Sealing in DIY applications
Sanitary applications
Connection and expansion joints
Sealing glass, aluminum, plastic, tile ceramic, glass fiber, pottery, etc
Package:
30ml, 50ml, 80ml
220ml, 240ml, 260ml, 280ml, 300ml, 280gr
Colors:
transparent, white, black, gray, silver, brown, bronze, red, blue, green, yellow, and so on
Markets:
Middle East, Southeastern Asia, Eastern Europe, South America, and so son
KALI 3000 / Kastar730 is an acid-curing, one-component silicone sealant for a range of general sealing and glazing applications. It's suitable for uses on common non-porous building materials.
Properties
Stays permenantly elastic after curing
Acetoxy curing system
Very good adhesion on common building materials and non-porous surfaces
Resistance to aging, cracking and discoloring
Resistant to many chemicals, cleaning agents and detergents
Can be applied in any season
Typical acetic smell during curing
sample
exhibition
Applications
General sealing and glazing applications
Sealing around windows and doors
Sealing in DIY applications
Sanitary applications
Connection and expansion joints
Sealing glass, aluminum, plastic, tile ceramic, glass fiber, pottery, etc
Package:
30ml, 50ml, 80ml
220ml, 240ml, 260ml, 280ml, 300ml, 280gr
Colors:
transparent, white, black, gray, silver, brown, bronze, red, blue, green, yellow, and so on
Markets:
Middle East, Southeastern Asia, Eastern Europe, South America, and so son
NO. | Item | Data |
1 | Type | Acetoxy |
2 | Density (g/cm3) | 0.96 |
3 | Capacity movement | ±30% |
4 | Skinning time | 10-15 minutes |
5 | Curing Rate(2mm/h) | 10-12 |
6 | Drying(4mm/h) | 24-30 |
7 | Max. Tensile strength | 1.3 |
8 | Hardness shore | 20±2 |
9 | Elongation at Break(%) | ≥450 |
10 | Modulus Mpa(100%) | 0.55 |
11 | Application temperature | -20°C to +40°C |
12 | Temperature resistance | -50°C to +100°C |
13 | adhesive | Good |
14 | Weatherproof | OK |
15 | Cold-hot adhesive | OK |
16 | Under water adhesive | OK |
17 | Elastic Recovery Ratio (%) | 96 |
18 | Mass-loss Rate (%) | 40 |